Comgrow 3D Printer Filament Dryer Field, Comgrow 3D Filament Storages, Conserving Filaments Dry Throughout 3D Printing, Appropriate with 1.75mm/2.85mm PLA ABS Materials, Filament Dehydrator, Spool Holder
Free shipping on orders over $50!
- Satisfaction Guaranteed
- No Hassle Refunds
- Secure Payments
Worth: $54.99 - $41.99
(as of Mar 11,2025 22:14:25 UTC – Particulars)
Comgrow is the primary vendor of Creality 3D on Amazon.
Product Dimensions : 9.2 x 6.4 x 9 inches; 3.31 Kilos
Merchandise mannequin quantity : AK36WG-1200400J
Date First Accessible : September 5, 2019
Producer : Creality 3D
ASIN : B098D366R3
Nation of Origin : China
Giant Storage Quantity -Filament Dry Field Internal Dimension: 9.29*6.49*9.13 inch. Comgrow dryer field can retailer 2 rolls of 1kg spools, appropriate with PLA ABS SILK filament. Works completely with all normal filament diameters 1.75mm/2.85mm.
Setting Notes – Set the temperature and length after turning on the filament dehydrator. The machine will work solely when the work state is displayed on the display screen. If the work mode isn’t displayed, the motherboard will robotically shut down after 3 minutes. If in case you have any unsolvable issues with the COMGROW filament dryer field, please be happy to contact us, our after-sales technical staff will give you detailed options inside 24 hours.
Filament Dryer and Take away Moisture – Comgrow 3d printer filament dryer field is designed to maintain filament dry and take away moisture from sorts of filaments. Inside heating throughout printing gives a dry storage surroundings for 3D printer filaments and retains the filament dry. Keep away from entanglement, clogging, poor adhesion, and layer migration attributable to the dampness of the printing wire. (Word: Solely used for the drying of 3D printer Filament)
Actual-time Monitoring of Temperature and Humidity – Adjustable temperature vary 40°~ 50 °C, the utmost temperature is simply 50°C,。setting time from 6 hours to 12 hours. A 2-inch LCD display screen and contact buttons make it straightforward to function, it’s extra complete and away from the knowledge show. Press the facility button to start out, and maintain the perform button(M) to alter the dry time and the temperature setting.
Nice Sealed Filament Dry Field -The outlet construction adopts a silicone cable sheath and Teflon tube, the outlet is easy and may be lined with a plug when not in use. The higher cowl has a snap button construction, and the sealing efficiency is sweet.When the drying field is working, the sealing gap must be opened to permit moisture to empty out. When not in use, the sealing gap must be closed to maintain the consumables dry.
How you can set the filament – Place the filament into the filament outlet. Please word that the path is positioned counterclockwise in order that the pulley on the backside can feed higher.If the display screen shows two errors, E0 and E1, please open the drying field and test all of the cable sockets on the motherboard to see if they’re broken or unfastened. If there’s any downside, please be happy to contact us for substitute.
Prospects say
Prospects discover the thermoplastic filament practical and good worth for cash. They are saying it really works effectively with most FDM 3D printers, and the valves perform as supposed. Many think about it a strong black possibility for the value. Nevertheless, some prospects have differing views on print high quality, filament high quality, adhesion, temperature vary, and ease of use.
AI-generated from the textual content of buyer opinions
Rev Scott Fultz –
the perfect print
The Comgrow PLA 3D Printer Filament is a reliable and affordable option for hobbyists, makers, and professionals who need high-quality prints with consistent performance. With a 1.75mm diameter and a dimensional accuracy of +/- 0.02mm, this filament ensures smooth extrusion and precise layer adhesion, minimizing common printing issues like clogging and stringing. The 1KG spool provides ample material for various projects, from detailed prototypes to functional parts and artistic models.One of the standout features of this filament is its strong layer bonding and minimal warping, making it ideal for both beginners and experienced users. PLA (Polylactic Acid) is known for being environmentally friendly, easy to print with, and suitable for a wide range of applications, including home décor, educational models, cosplay props, and engineering prototypes.The Comgrow PLA Black filament offers a deep, rich black color with a smooth finish, making prints look professional without requiring excessive post-processing. It works well with most FDM 3D printers, and its low printing temperature (190-220°C) makes it compatible with standard heated beds at around 50-60°C.Overall, the Comgrow PLA filament provides great value for money, delivering consistent quality, good adhesion, and reliable extrusion. Itâs perfect for those looking to produce high-resolution prints with minimal hassle. Whether you’re a beginner exploring 3D printing or an experienced maker working on intricate designs, this filament is a solid choice for your printing needs.
Nick –
Great dryer. Great price.
This dryer works great. Love how it has options to print from it. I am glad I got this one, the price is right and it works great. Been using it for over a week. It doesn’t really. 24/7 but I have used it a lot. I have it set up right next to my printer and the filament comes right out the top and into the printer.
joni –
Great dryer for the price point!
Simple clean design. Not complicated to use. Works great! Love that it is a sealed box and can be used for filament storage. Great value. Perfect size. No clogging! The clear top gives you view of how much filament you have left. The bottom color matches everything else on the desk top. It’s black. ð¤£
Darren –
OK for basic prints
I haven’t been super impressed with this filament. It’s not bad. I don’t want to give that impression and I’m no expert. That said my results with it have been a little inconsistent. I’ve printed a bunch of large prints. Parts for my printer as well. All of the parts are functional and decent looking. That said it seems brittle at points and not at others. I did put the roll in my dehydrator for several hours and it did peel off about .5 ounces in weight which leads me to believe the symptoms I had were caused by moisture. I’ve only had this roll for a month or so and I keep it in a ziplock with a large desiccant pack. This makes me wonder about the condition at packing time. All that said, for basic prints the results were acceptable. The price was reasonable and it’s a large roll. I’ve found others I like better but if you get a good price and just want a large roll to crank out some big parts this works fine.Update: Customer service from Comgrow is excellent. They have reached out multiple times to assist. I will give their products another try knowing they stand behind them.
john andrew schultz –
Huge benefit
I am amazed at how good this works. I was skeptical of buying the cheapest one I could find but am just a utilitarian 3D printer. I make parts and useful things when I need them, so my printer may go months without being used. In turn, my filaments sit on my rack without being used as well. At first, I would open a new filament and use it and it worked great, then the next time I went to use it it would make a mess. Adhesion? I donât really know the reasons. BUT, after 16 hours in this dryer, all my filaments work great.It would probably be more useful if I knew the technical reasons that this works wonders, but I just know it made a difference between 90% failure and (so far) 0% failure.People who complain about the latches should just be more careful. They work fine. I really donât know why anyone would buy a more expensive unit.I havenât printed âout of the dryerâ. I just dry for 16-24 hours and then transfer to the top reel for the job.Also, the unit is very quiet and not much bigger than 2 reels of filament.
Shelley –
Itâs nice and dry!
Great filament. Arrived dry and new, fully sealed. Works perfect with the same settings as BambuLab PLA. Will buy again!
Crash Davis –
Inconsistent quality and instrumentation on the dryer
The first one of these i bought works great! It works on PLA, ABS, PETG and ASA. It had 2 feed holes in the lid with silicone plugs, so you could print right out of the dryer. There is even a plug for the power cable opening if you’re storing filament in the dryer.The first one worked so well, I bought a second one a few months later. That one is not the same, it has four holes in the lid instead of two. It barely gets to 50c. The humidity reading on the dial never gets below 8%. It does the job. Just significantly slower than the one that came with two holes in the lid.Also, the new power supply is significantly noisier than the first. It puts out enough RF thar it causes hum in a nearby amplifier line on my speakers.I’ll keep the second one. It does work. It dries plastic. Just nowhere near as nicely as the first. Quality was great on the first. Downhill slide on the second.
kf –
Great value, works well!
Bought the dryer because of it’s low price and after learning how to use it properly, discovered that it works quite well. Even though the highest temp is 50°C, it’s more than enough to get the humidity down to 18% in Hawaii! The trick is to crack the cover open and I put a couple of packets of desiccant in for after I turn it off and close the top cover for storage. Printing directly from the dryer with it on, is a definite bonus to a great print. The bottom does get quite warm and should be raised for some air flow under the dryer. Just create and print a small stand, after all, isn’t that what you bought a 3D printer for? For the price, it’s a great value.
shawnsetia –
The Comgrow PLA White Filament is my go-to choice for 3D printing. It’s reliable and prints smoothly, whether I’m working on functional parts or creative projects. I’ve found that using filament from the same company that made my printer ensures the best results. The filament diameter is consistent, which helps prevent jams, and it sticks well to the print bed without warping. The spool is well-packaged, too, so I’ve never had issues with tangling. Overall, it’s a solid option if you’re looking for high-quality PLA filament that won’t break the bank
Abraham147 –
I ordered the black one to try as the price point was pretty good. I’ve been very pleased with the products so far! I’ve had no trouble with adhesion, it sticks to the printer bed cleanly, and has been great for the prints I’ve been working on. So far my longest print has been 10hrs, which I’ve run quite a few times and have had not a single issue. Would definitely recommend it.
Daniel –
Llego en perfecto estado, pero el producto llego abierto, la etiqueta de sellado habÃa sido retirada, pero supongo que fue por el el proceso de aduanas ya que fue un producto de importación, de todas formas al revisar el producto que es lo importante parece ser que todo está en orden y que los filamentos aún conservan su empaque al vacÃo, más adelante actualizare sobre el desempeño de los filamentos ya que no he tenido tiempo de probarlo
Plasman –
Un produit utile pour préparer ses bobines de filaments avant une impression 3D.Il est très pratique à utiliser avec deux boutons : un pour allumer l’appareil, l’autre pour les réglages de température et de temps.la température est réglable de 40 à 50 degrés. Le temps de chauffe est réglable de 6 à 12 heures.Un afficheur indique la température et le taux d’humidité à l’intérieur du boitier.
Avel –
En una Anycubic se pudo imprimir sin problemas siguiendo las especificaciones del vendedor