Thermaltake Versa H21 SPCC ATX Mid Tower Pc Chassis CA-1B2-00M1NN-00,Black

11 reviews for Thermaltake Versa H21 SPCC ATX Mid Tower Pc Chassis CA-1B2-00M1NN-00,Black

1. 

   Amazon Customer – March 13, 2025

   Excellent Budget Case
   Pros: By far the best budget case I’ve ever tried. Case layout is well thought out, all the features work (in the past budget cases would have features that looked correct but didn’t function, all the features on this case are functional), front io panel is simple and useful, there’s enough room for cable management in the back. The metal is thin but strong enough to do the job. The drive bays are easy to use and work great. Cons: The front cover is difficult to take off which makes installing/cleaning front fans difficult, the rear expansion slot covers are difficult to remove, the PSU dust cover is kinda finicky, the included fan is pretty cheap/loud, one of the amazon pictures shows a side window, which this does not have. Overall: Great case for the $$, obviously if you spend more you’ll get more. All the essentials are executed correctly on this case, would buy again.

2. 

   Todd Robbins – March 13, 2025

   Great case for the money, lots of nice options
   I was pretty happy with this case overall. It was a bit of a tight fit stepping down from a full tower Lian Li case that I was previously using but managed to get all the components to fit after a bit of trial and error. A couple of things to note. The drive bays are a little strange but actually kind of cool once you get used to them.The drives will “snap” into the carriers, thing is you actually put them in so the sata connectors are towards the back of the case. If you put them in toward the front the cables won’t fit properly under the side cover as there is very little space there once that cover is on. However it is easy enough to just feed them through the case to the back and you’ve got a lot more room to work with. Makes for good cable management I guess but it was a bit unexpected so I was scratching my head for a minute or two.This will mount 2 120mm fans up front, on in the rear and two up top of standard size which is a lot of airflow. My setup is a bit different, my CPU uses a water cooling rig with a single 120mm radiator so I mounted that out the back, relocated the 120 mm fan that was there to the top (only room for one in this case, you can’t really mount the second fan as the radiator is just a touch too big to allow the fan to go in up top, then I mounted two 120mm fans up front. Works very well, keeps the system quite cool and I’m very happy with thermal management.Hard drive bays are nice, you’ve got room for 3 x 5.25 and the covers for those slots can be removed and then replaced if you decide to change your setup which is very nice, they just snap in. Internally you have 3 2.5 bays which work great for SSD drives and 3 3.5 inch bays that I used for some 8tb sata drives for a good amount of storage.I did add a fan controller, having all those fans running full blast was a bit noisy and I liked being able to turn them down a bit to quiet the system a tad. But all in all it’s a good little case, I liked it because it is just low key and doesn’t have all that silly acrylic side panel look at all the LED lights like a lot of other mid tower cases have. I know people love those for gaming rigs but I’m building a computer, not a landing strip for aircraft.. lol.I would purchase this again, for the money it’s pretty hard to beat for mid tower cases. I did give it 4 out of 5 stars due to the lack of well written documentation, getting this together was more trial and error than anything else, and the location of the 120mm fan exhaust port on the rear, if they had just moved that down a centimeter or two I would have had room for another fan. I don’t need it for cooling you understand up top but it’s an OCD thing, I’ve got one slot with a fan and one without which just looks a little off. But other than that, great case.

3. 

   Mr. Largo – March 13, 2025

   Great Case for the Money!
   I used this case for my most recent build and I am completely satisfied with it.Plenty of room,Well-constructed, still light weight,Good, clearly identified cables,Plenty of fan locations, I have installed 4, 120mm fans (2 on top, and 2 in the front), in addition to the one that came with it.Well-ventilated with mesh front and top,Awesome case for less than $60.

4. 

   Ralph D. Bailey – March 13, 2025

   Very nice!
   If you need a ATX case, this is a good one. Lots of bays. I use a LG BluRay cd drive and a 5.25″ card reader/ usb hub on the front. Layout is excellent with lots of room. Quite inexpensive for a high quality case.

5. 

   JMinBaltimore – March 13, 2025

   Easy to use and plenty of space.
   Found this case by accident. The price was right and it has plenty of slots for expansion drives and ample space for any size motherboard. It is a cheaper example of the Corsair 200R – not quite as wide, but the same general layout for drives. Another difference is that the Corsair is all powder coated metal, this one is metal framed but plastic hardware for holding drives. Nevertheless, unless you are going to open her up and play under the hood more than a couple times a year, some of the plastic parts could break. Otherwise, this is a great basic case – not much for gaming as none of your gear is visible because it’s a solid case. For us, it works great and $43 was more than fair.

6. 

   Richard Woodman – March 13, 2025

   Good case but not very adaptable
   This is a good case, sturdy enough for the price point, and with space for a lot of drives; however, it loses a star from me because the drive enclosures are not removable at all without a drill; they were assembled together with screws which then had the heads cut off, which combines the worst aspect of screws and rivets, being unremovable with a screw driver but also difficult to drill out. This is fine if you happen to need only 3 3.5″ and 3 2.5″ and 3 5.25″ drives, but not so great if you need more space for 3.5″ drives, which was my situation.There are adapters to convert the 3 5.25″ drive area into space for 5 3.5″ slots available from various vendors, but I ran into trouble because there ended up being too little clearance between them and the power rail on my full ATX motherboard. I ended up buying an inexpensive server rack on newegg for $200, much higher than the price point of this case.Those complaints aside, it works well for what it is, has good airflow and is sturdy enough to not warp if you have to transport it after it’s filled.

7. 

   Baz – March 13, 2025

   I have just returned after a long term overseas contract and to save weight I left my Thermaltake Elements G case behind and just bought the mobo home to make a storage PC.The case is so cheap I thought I had been sent a Chinese no-brand case. Flimsy metal, cheap plastic HDD trays when we should be moving away from such materials, once you remove the rear close-outs and the 5.25 optical bay closures – you will never get them to fit back in as the tin foil metal bends irreparably. Also the numerous sharp edges from breaking out said closures cut your hand with annoying regularity.God how I wish I had bought mt Elements G case home – it was everything that this one is not. Buy a different brand as Thermaltake are no longer a quality manufacturer. If I could give this 0 stars, I would.

8. 

   lmp – March 13, 2025

   I upgraded my main computer for a brand new one and I re-used the cabinet for this new computer. Since the old I7 is still in perfect running condition, I needed a new cabinet for my old computer.This cabinet is perfect for my needs. It has 3 5.25 inch expansion bay for cdrom or tape drive,3 slots for 3.5 inch disks and 3 slots for 2.5 inch disk. It come with a fan in the back and has the holes for installing a cooling system on top ot the cabinet. A fan can be also installed in front of the cabinet for cooling disks.Disks can be installed on a tray that can be easily removed.I also like the fact that you can pass all the cabling in the back of the cabinet.Overall, this is a great cabinet for the price.

9. 

   Mohammed juma murad – March 13, 2025

   لايصلح لاستخدام المحترفين

10. 

    Naeem H – March 13, 2025

    The internal bays do not accommodate large hard drives to allow side cover placing including large cooler interfering due to the width of the case. it is meant for smaller hdd drives also since I purchased a Ryzen 9 9950X using a large cooler Assassin CPU cooler purchased did not work. I could find no way to orient the cooler to fit mid ATX case although needed just millimeters needed for fitting in space and be limited to use only use smaller coolers not as efficient in cooling as well (hard disk drives)ProsIt does have front 3 bays for dvd as I have multiple old type hard drives and needed space would not work in my case but may work very well for other builds. It accommodates the. 850 watts power supply and full atx motherboard nicely. Unfortunately I l had to return caseThe case is nice looking overall also with noise interference blocked with metal no fancy glass Not for fancy led lights as it is more secure.

11. 

    TheMikeness – March 13, 2025

    Very good case, one of the few I could find which had space for two front mounted 120mm fans with a bottom mount power supply design. I wanted two intake fans to help ensure there is plenty of airflow since my CPU is liquid cooled, and this case makes that not just possible, but downright convenient. The cable management area is great because it gives you plenty of options for where you want a cable to enter or exit, and nothing is arranged awkwardly or blocking the airflow with my setup as a result.