VICSEED Automobile Cellphone Holder Mount [All-Round Silicone Protection][Doesn’t Slip&Drop] Air Vent Cell Cellphone Holder for Automobile Arms Free Simple Clamp Cradle in Automobile for iPhone Samsung Android Smartphone
Free shipping on orders over $50!
- Satisfaction Guaranteed
- No Hassle Refunds
- Secure Payments
Worth: $32.99 - $19.95
(as of Mar 13,2025 05:26:28 UTC – Particulars)
From the model
Full Upgraded Navy Grade Clip [Secure& Stable]: VICSEED telephone automotive holder with the newest improved vent clip with built-in navy steel and outer aerospace materials “PTFE”[ Won’t broken & Drop off ]. automotive telephone mount attaches simply and securely to most of air vent. After take few seconds to put in it properly, clip varieties a three-point mechanical assist with baffle, even you hit a bump or a sharper flip automotive telephone holder will keep in a spot. It ensures a protected, distraction-free automotive surroundings
Good Safety: Say goodbye to the easy-scratched plastic panel telephone mount. VICSEED mobile phone holder for automotive provides a improve high-density silicone materials with glorious resilience. The automotive mount for telephone is roofed in a thick layer of silicone that can guarantee your cell system is protected from put on and tear. The unprecedented design makes leaves zero scratches on cell units
Simple to Modify & A number of Viewing Angle: This automotive mount for telephone has a extremely versatile ball-joint 360° rotation that gives infinite viewing angles. The telephone automotive mount permits fast switching between vertically and panorama view .Place your telephone on the excellent angle, relieve driving fatigue, and it will not block your view of the highway to take pleasure in a extra relaxed and safer drive
Safe Grip & One-button launch: This automotive mobile phone holder owns the thick arms built-in anti-slip rubber pads, which makes the iphone automotive mount can safe grip your cell phone. No want fear your telephone will fall off from the samsung common automotive mount. It ensures a protected, distraction-free automotive surroundings. The palms free mobile phone holder for vehicles additionally contains a One-button launch system that allows you solely take 0.1S to lock or launch your telephone with one hand operation
Pleasant Design, Common Compatibility: VICSEED improve telephone stand for automotive owns adjustable foot, the operate not solely has keep away from some mobile phone energy or quantity button can be squeezed by the clamp arm but in addition make the iphone holder can match properly for giant telephones.Match properly for all cell phones between 4”-7”in width and most thick case, Even iPhone 15 Professional Max with Thick Otterbox case, palms free mobile phone holder automotive additionally maintain your cell phone simply
Prospects say
Prospects discover the moveable digital system mount works properly. It securely holds their telephones in place with out wobbling round. They discover it straightforward to put in and simple to connect to vents. The mount is sturdy and has lasted the longest with out breaking or loosening. Prospects admire that the telephone by no means wobbles or falls off.
AI-generated from the textual content of buyer evaluations
Mom to 2 –
Durable
We had tried a few before this one. It is able to fit many different phone sizes, easy to install and it grips your phone well. So no scare of it falling . Have been using it for the past few years and has been working great. My husband wanted one too so he has one in his car as well now.
Shopper –
Exceeds expectations
I absolutely love this mount. Installation took seconds. My phone doesn’t “flop” around at all,even when I’m driving down bumpy roads. This is the first vent mount I’ve found that is sturdy on my vertical vents, my phone doesn’t sway back and forth with turns, I don’t have to continually adjust the cradle. I’m extremely happy with the purchase.
Boy mama! –
Get it! Very sturdy
Great holder, I first used this in my friend car, because I couldn’t find any that hold my phone. I have the samsung fold, and thja worked great for me. Easy to set up and very sturdy. And expand to your phone size.Get it you won’t regret it
Heather, NC –
Works fine but release button needs redesign
It’s straight forward to attach it to vent. The width adjustment works smoothly and the foam pads hold the phone securely. The charging cable goes between the two feet of the holder without blocking. I have take about 6 trips after attached the holder including one on bumpy gravel road. The iphone stays on the holder with outing falling or twisting. The only change I wish to see in the next version of the product is the release button, which locates on the lower right side of the holder. Since vent is on the right side of the driver’s seat, I have to tilt the holder toward me, leaving the release button leaning against the vent and have to be tilt it back to release the phone. It’s annoying to adjust the holder tilt every time using it. If the design can include release buttons on BOTH left and right sides of the holder, the users can touch with side of the button to achieve single-button release whichever side the holder is attached to.
Michelle Kung –
Finally a sturdy, no-slip phone mount–updated clamp is worth it!
I bought my first VICSEED car phone mount 2 years ago in June 2020 after doing a bunch of comparative research between the popular Amazon models, paying attention to the photo reviews. In particular, I find that I really need these key things in a good phone mount: a “one-touch” release button, a clamp that holds my phone securely that can be adjusted to fit different sized phones (not a wedge or pocket), and a fully adjustable clamp that rotates the phone to any viewing angle I please. I dislike the suction cup/sticky mounts because I’ve gone through a couple of them since 2014 and they always eventually fall off (at the worst times while you’re driving) or you can’t reliably adjust the mount in the future.This VICSEED phone mount is my holy grail, especially with the updated air vent clamp that now comes with little teeth at the end that prevent the clamp from slipping off the vent tab. That would occasionally happen to me with the old model, which I found really frustrating and downright dangerous after driving on a bumpy road and the old model fell off and slipped under my brake pedal. I immediately emailed the customer help info (little card that came with the item, or you can google it) and got a response within 24 hours. Two very polite and friendly staff members confirmed my order and address info, and shipped me the new updated clamp. I have had ZERO problems with this VICSEED model and I love how it’s the right balance of sturdy but adjustable.In the first photo I attached, you can see the difference in the old clamp (shown at the bottom) and the new clamp (the one on the top right that has teeth). Note that the new clamp for the air vent has a slightly longer reach, which accommodates most air vent tabs that aren’t super long. I drive a Toyota RAV4 2019 and my mom drives a Toyota RAV4 2016 (where these photos are from), and the mount works perfectly with the air vents next to the touchscreen (not the one to the left of the steering while). Keep in mind that if your air vents have extra long tabs (like my own Toyota Sienna van), the new clamp will not work, since the teeth need to be able to lock securely /behind/ the tab. You’ll want to opt for the no-teeth clamp version instead, which fits with any kind of air vent regardless of tab length. The new clamp with teeth prevents the car mount from /ever/ slipping off, because the teeth lock behind the tab in the air vent. If it comes off, it’s because it was broken off.INSTALLATION can be a little tricky, but all the parts are solidly built. The ball-socket joint that allows you to rotate the mount is very smooth, but you will need to apply some force to get the ball into the socket. Do NOT jam it in.(1) I recommend first screwing the circular “washer” part lightly onto the car mount, so that it is still a little loose.(2) Look at the rotating piece around the clamp, it looks like a capital letter “I” as in the word India. Make sure that piece is a little loose–it controls whether the clamp is held closed. You will adjust and tighten it later after you’ve clamped down on your chosen air vent tab.(3) Both rotating pieces should be loosened for later adjustment. Firmly push the ball joint of the air vent clamp into the circular part, until it clicks into place. (Be patient, or have someone else try. I couldn’t manage after 5 minutes and my mother got it right on the first go.)(3) Now you can take this thing out to your car. Select an air vent that you want to use and push the clamp around the air vent tab and in as far back as it will go–if you can squeeze the clamp shut with your fingers and not be able to pull it out when it’s shut, then the “teeth” on the clamp have locked behind the air vent tab. (Picture a crocodile eating a long chunk of meat cleanly in one snap, with nothing poking out of its mouth.) Congrats, your air vent is compatible with this model and not too long.(4) Now you’ll tighten the “I”-shaped rotating piece in front of the clamp so the clamp stays shut; you can remove your fingers to test if it feels securely shut. (Remember that “turning right is turning tight.”)(5) Now rotate the ball-socket joint until the car mount is at a preferable viewing angle. You may find it helpful to actually put your phone in to see what it’ll look like. When you’re satisfied with the angle, tighten down the circular piece until it’s snug. This is very secure and my phone never wobbles when I’m driving on bumpy roads, but you’ll get the hang of adjusting it until it’s the perfect angle and you’ll never have to touch it again.(6) Final notes: you put your phone in by squeezing the two clamps on either side of your phone, and release the phone by pushing the button on the bottom left (if you’re looking at your phone screen). The button is super easy to use and the set-up allows my family to use an iPhone 6s and the iPhone 12 Pro Max without issue.Ok, that was a highly detailed installation guide but now you’ll never need another one, haha. Drive safe!
Maui –
Best value for the price
Itâs cute, itâs adjustable, itâs affordable. It turns sideways if you want to change the view on your phone, you just have to make sure to tighten the angle in back or the phone can be too heavy sometimes and kind of fall forward. Itâs not a big deal and ts easy enough to fix but you do have to remove it in order to fix tighten the adjustment. It stays in the vent though and does not come out! Thatâs whatâs really important. Itâs easy to release with the button on the side and and then when you put your phone back you just push the sides tight around the phone to secure it. Thereâs a place at the bottom for your charger to hang also incase you need to charge it while itâs in the holder. I looked at every cell phone holder on Amazon for weeks and compared and contrasted, and Iâm happy with my purchase⦠it has everything I needed and wasnât super expensive. I accidentally bought 2 and i didnât even return the other one. I gave it to my boyfriend. Itâs pink but he still uses it, it comes in handy! So you donât have to hold your phone while youâre trying to drive, like to look at you gps or whatever.
Amazon Customer –
Itâs great product. For the First time , iâm willing to give 5 star to this product !!!
Thanh Nguyen –
Exactly what I need
joseph theoret –
It attaches to my air vent on my 2007 Toyota Yaris. I use to place my phone on it for work.
Marie-France savard –
Ne ferme pas bien